BackyardBlaze.com 9811 West Charleston Blvd., Ste. 2, Las Vegas, NV 89117 Phone (877) 269-8068 www.backyardblaze.com
Inspect the Appliance and Components
Warning
Do NOT install damaged components
Do NOT install incomplete components
Do NOT install substitute components
Clearances
Below is a general fire feature structure clearance guideline. Be sure to check for fire feature clearance
guidelines, codes, or ordinances specifically for your area.
WARNING
Never operate an open flame fire feature under any type of overhang or cover.
WARNING - FIRE RISK
Assembly
Each Fire Pit Ring includes a center hub screw cap with wrench for installation. This screw cap
provides the option to install the Fire Pit Ring with the gas exit holes facing up or down depending on
the fuel type, region, and the type of fire feature the Fire Pit Ring is being used with. Install the screw
cap into the center hub opposite of the gas inlet.
Before installing Fire Pit Ring to gas fitting or screw cap, be sure gas tape-or pipe dope is applied to
assure of no gas leaks with the Fire Pit Ring installation.
WARNING
NEVER operate a Fire Pit Ring without the screw cap installed in the center hub.
