background image

 

 

Document Number 101-000 Rev. 000 Date 2/23/04 

6

the free-hanging chains.  Ropes, cables and chains should be removed and 
replaced if excessive wear is found.  Contact Backyard Adventures for 
replacement parts. 

6.  Sand rusted areas on metallic members such as monkey bars, hand supports, 

brackets, etc. and repaint using a nonlead-based paint meeting the requirements of 
Title 16 CRF Part 1303.   

7.  Inspect wood parts monthly.  The grain sometimes will lift in the dry season 

causing splinters to appear.  Light sanding may be necessary to maintain a safe 
playing environment.  If you are treating your Playcenter with stain regularly, it 
will help prevent severe checking and other weather damage. 

8.  We recommend treating the wood components once or twice a year depending on 

the type of weather you have and when sanding has been required to maintain a 
good surface. We treat our redwood with a Waterborne Transparent Stain.  For 
details, contact the factory at 1-800-856-4445 or 

custservice@adventureplaysets,com

 

9.  Creating and maintaining the Playcenter on a location as close to level as possible 

is very important.  As your children play, your Playcenter will slowly dig its way 
into the soil, and it is very important that it settles evenly.  So make sure it is level 
and true once each year or at the beginning of each play season. 

 

Disposal Instructions: 

 
When the Playcenter use is no longer desired, it should be disassembled and disposed 
of in such a way that no unreasonable hazards will exist at the time the unit is 
discarded. 

 
 

Summary of Contents for Belmont


































Reviews: