Back to Basics ICE MASTER 3000, User Manual

Page: 9 / 23

9
ICE MASTER CONTROL BUTTONS
CHOP runs the
Ice Master at a
medium speed
for ingrediemts
like cheese.
ICE CRUSH
runs the
Ice Master at
high speed.
This speed
should be
used for the
final stages of
mixing.
����������
BLEND runs
the Ice Master
at low speed.
This speed
should be used
for the initial
30 seconds of
mixing.
PULSE runs the Ice
Master at high speed.
SMOOTH runs
the Ice Master
at medium
speed.
MIX
runs the Ice
Master at a low
speed for dry
goods
.
BLENDER OPERATION
1. Assemble the blender blade base onto the blending jar.
2. Add ingredients to the blending jar and replace the lid. You may add more
ingredients through the hole in the center of the lid. (Note: Add liquid
ingredients first, then add frozen or solid ingredients. This will prevent
excessive wear and stress on the motor.) Cover the hole with the clear lid
cap or stir stick during operation.
3. TO START BLENDING: Choose a speed for blending the ingredients on the
control panel.
4. TO STOP BLENDING: To stop the blending process, push the
PULSE/STOP button.
5. PULSE MODE: The PULSE button allows you to create short bursts
of power. To use the PULSE function, repeatedly push and release
the PULSE button. The PULSE function should be used in the initial
stage of blending ice and frozen ingredients for smoothies and other
frozen drinks. The PULSE function should also be used to break apart
larger pieces of food or to control the texture of food when chunkier results
are desired.
6. ICE CRUSH: Short bursts not continuous.
OPERATION
PUREE runs
the Ice Master
at a higher
speed.
STOP shuts off
the Ice Master.