16
1.1.5 Displaying the IP address
1. Make sure you are in the "Maintenance" menu
2. The second page is displayed by pressing the "Page" button. The IP address
and MAC address of the PDU are listed here. Possible displays include:
a. Down
No cable connected or an address cannot be obtained from the DHCP
server
b. DHCP...
An address is being requested from the DHCP server
c. xxx.xxx.xxx.xxx (IP address)
The set IP address or the address obtained from the DHCP server
4.8 Resetting to factory settings
Factory Reset
Reset:
factory defaults
Exit
Reset
1. To reset the PDU to factory settings, press and hold the "Delta" button on the
start page
2. The "Factory Reset" page appears after five seconds
3. Press "Reset" button
4. The PDU resets to the factory settings and restarts
Summary of Contents for BlueNet BN2000
Page 1: ...Manual BlueNet BN2000...
