Bachmann BlueNet BN0500, Manual

Page: 8 / 20

8
bachmann.com
english BlueNet BN0500
Thank you
Congratulations on selecting the intelligent BN0500 power strip from Bachmann's BlueNet series. From the
moment of installation, the various products in the Bachmann BlueNet range will deliver you a high level of cost-
effectiveness. The various modules offer you the best conditions for setting up an optimized energy management
system.
Before starting to use this product please read the entire manual and observe all operational and safety notices
to ensure safe operation.
Safety Information
Use only in indoor, well ventilated and dry areas.
Never use the power strip immediately after bringing it into a warm room from a cold one.
The condensation this creates can, in some cases, cause a shortcircuit and destroy the product.
It also presents a fatal electrocution hazard!
The power cable of the power strip must be neither repaired nor replaced. If the power cable is damaged, the
power strip must be replaced.
Ensure when selecting the installation site that no high humidity, high temperatures (see Technical Data),
moisture, solvents, flammable gases, dust or vapors are present. The heat generated during operation must
be dissipated.
The power strip may be operated only when connected to power socket protected by a 16A fuse. Do not ex-
ceed the maximum power transmission (see Technical Data). If the power strip shows outward signs of wear
from transport or improper handling, it must not be put into operation or must be put out of operation immedi-
ately and must be replaced or sent back to the manufacturer for repair.
Danger of fatal electric shock:
Never carry out work on the power strip with wet hands.
Risk of finger crushing during installation or mounting work.
BlueNet BN0500 is a maintenance-free system.
There is no need to open the housing during installation.
Do not use aggressive substances such as spirits or acids to clean the unit, as these can damage it.
To clean the housing use a slightly moistened cloth.
Observing these notices is part of our terms of warranty.
The product fulfills the requirements of the valid European and national directives and standards.
The CE conformity has been documented, and the corresponding certificates are on file at the
manufacturer's location.