Instruction 0019-9337
11
Oxor® III
4.5 Using the Backlight
The LCD can be read in dimly-lit areas by pressing the
LIGHT
button.
The backlight automatically turns OFF after 10 minutes of keyboard
inactivity, but can be turned OFF at any time by again pressing the
LIGHT
button.
4.6 Saving Test Data in Memory
Up to 10 individual sets of test data can be saved in memory as follows:
Note:
When memory is full, the next reading saved will over-
write the oldest reading.
1. If the analyzer is in its Run Mode, press the
HOLD
button
twice
to
enter the Print/Memory Menu Screens. If the analyzer is already
in its Hold Mode, press the
HOLD
button only
once
. The
fi
rst menu
item displayed is the Print Screen.
2. Press the button
once
to display the Save Screen. The number
shown in this screen represents the memory location (1 thru 10) to
which the current test data will be saved.
3. Press
ENTER
to save the test data and return to the Hold Mode, or
press
HOLD
to return to the Hold Mode without saving.
