Calibration and Maintenance
Monoxor
Plus Manual
40
0019-9370 Rev 1
5.2.1. Equipment Required
•
Alcohol
•
Aerosol Can of Automotive Carburetor Cleaner
•
Clean Rag
•
Source of Compressed Air (optional)
CAUTION:
Do not use flammable or combustible substances (like
carburetor fluid used for cleaning the probe) near an open flame.
5.2.2. Procedure
Step
Cleaning the Probe
1
Remove gas sample hose from the disposable filter assembly.
CAUTION:
Carburetor cleaner damages plastic components.
Take precautions not to spray cleaner onto the probe handle or
analyzer.
2
Insert the plastic spray tube of the carburetor cleaner into the gas sample
hose, and then liberally spray carburetor cleaner through the hose and out
the probe tube.
3
After spraying, remove all the residual cleaner by repeatedly flushing the gas
hose and probe tube with alcohol.
4
Wipe off the surfaces of the probe and tubing with a clean cloth.
5
Allow the parts to dry completely. If available, blow compressed air through
the probe to expedite the drying process.
6
Reconnect gas sample hose to the disposable filter assembly.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
