Page 1-4
Bacharach, Inc.
Instructions 67-9319
INTRODUCTION
INJECTOR CALIBRATOR CD3
" A "
B O D Y T O S E A T C L A M P
" B "
P l u n g e r t o B o d y C L A M P
Feature
Operation
___________________________________________________________________
“A” OR “B” Button
There is no physical movement of the clamping mechanism
when this button is pressed but it must be held down to
operate the body to seat clamp or plunger to body clamp.
This is part of the two hand safety operation system.
_____________________________________________________________________
Figure 1-4. Right Table Features
RIGHT OPERATOR’S TABLE FEATURES
Feature
Operation
___________________________________________________________________
“A”
Clamps body to seat. Will operate only when flywheel
BODY TO SEAT
is in a certain angular position and the HOLD TO
CLAMP Button
OPERATE “A” or “B” button is held down.
“B”
Clamps plunger to injector body. Will operate only
Clamp/Unclamp lever
when the HOLD TO OPERATE “A” or “B” button is
(4-way selector valve)
held down.
