Instruction 0019-9210
19
The Informant Refrigerant Leak Detector
Figure 5. Exploded View of The Informant
Maintenance
See Figure
8 for electri-
cal connector
detail.
See Figure 7 for
instructions on how
to replace fan.
See Figure 6 for
instructions on how
to remove Front
Retaining Collar.
8. Position the probe assembly between the two case halves, routing the
fan wires through the notches in the case as shown in Figure 8. Then
reassemble the case, push on the front retaining collar, screw on the
probe tip, and reinstall the batteries.
9. Turn ON detector; then check that it responds in a positive manner to
a source of refrigerant gas.