H25-IR PRO External Filter Retrofit
4
P/N: 3015-9004 Rev 0
SECTION
2
:
REPLACEMENT PROCESS
2
.1.
Rear Plate Removal
Step
Description
1
Unplug the AC power cord.
2
Unplug the probe assembly.
3
Remove the front and rear
bezel by gently pulling at the
left or right center point.
4
Remove the top chassis
screws at the front and back.
Pry up on the chassis lid and
remove.
5
With the rear of the chassis
facing you, remove all three
terminal blocks by pulling
straight out.
6
Disconnect the RS232 and
audio PCB ribbon connectors.
