Instruction 0024-9435
12
Fyrite Tech
1. If not already done, enter Setup per Section 3.5.1. Repeatedly press
EN TER
until the Year Setup Screen is displayed.
2. Press the or button until the correct year is displayed.
3. Press
EN TER
to move to next Setup Screen, or press
I/O
to exit
setup.
3.5.7 Selecting Printer Protocol
(Model 60 only)
The analyzer can be set up for either an HP or IrDA type printer.
1. If not already done, enter Setup per Section 3.5.1. Repeatedly press
EN TER
until one of the following screens is displayed.
2. Press the or button to select the desired printer protocol.
3. Press
EN TER
to move to next Setup Screen, or press
I/O
to exit
setup.
3.5.8 Exiting the Setup Mode
Press the
I/O
button at any time to exit the Setup Mode and turn OFF the
analyzer.
Note that the last displayed parameter is automatically saved in memory.
