Instruction 0024-9396
15
Fyrite Pro Quick Reference Guide
2. Press the
or button until the Open Screen is displayed, and
then press
ENTER
to open the memory locations for viewing. The
number shown in the second screen represents the most recent
memory location where data was stored.
3. Press the
or button to scroll to the desired memory location, and
then press
ENTER
to recall the stored data and return to the Hold Mode.
While in the Hold Mode, the recalled data can be viewed using the
and buttons, or printed per Section
Printing Test Data
on Page 16.
Clearing Saved Test Data
(Model 105/110/120/125)
Clear all saved test data as follows:
Note:
If no test data has been saved, the option to clear
memory will not be available.
1. With the analzyer in its Run Mode, press the
HOLD
button
twice
to
display the Print Screen.
2. Press the
or button to scroll to the Clear Screen, and then press
ENTER
to display the Clear All Screen.
3. Press
ENTER
to clear memory and return to the Hold Mode, or press
HOLD
to return to the Hold Mode without clearing memory.
