ASSEMBLY
ASSEMBLY
11
12
Copyright © 2019, Baby Trend Inc., All Rights Reserved.
Copyright © 2019 Baby Trend Inc., All Rights Reserved.
•
Mobile phone positioner:
Align
mobile phone to the clip and
insert it through the grips. Make
sure to push the phone all the
way down into the positioner
(Fig. 6c).
NOTE:
The positioner may not
accommodate all mobile phones
or other devices. Do not use
positioner as a secure holder
when stroller is not in use or if
your phone is loose or is too
large.
• Removal: Under the stroller
frame locate the parent tray
tabs. Press them inwards and lift
up the tray from the housing (Fig
6d).
CHILD TRAY
WARNING:
The
child’s tray is not a restraint
device: always secure your
child with the seat belt. DO
NOT lift the stroller by the
child’s tray. Use care when
child is in the stroller and
securing the front tray. Do
not place hot liquids or more
than 3 pounds (1.36 kg) in
the child tray. Serious burns
or unstable conditions could
result.
7)
•
To attach the child tray:
Push
the tray downward and onto each
side of the front armrests until both
sides snap into place (Fig. 7a).
Check that the tray is secured by
slightly pulling it upwards.
•
To access the child seat:
Pull
one release lever (Fig. 7b) on the
underside of the child tray and lift
upward. Either side can rotate up
to access the seat (Fig. 7c).
NOTE:
To remove the child tray:
Pull each release lever on both
sides of the tray and pull upward.
Release Lever
Fig. 7a
Fig. 7b
Fig. 6c
Fig. 6d
Fig. 7c
Some mobile phones
require pulling the tabs
to insert.
