23
24
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Press
Removing the car seat
NOTE:
Set handle to the carry
position (Fig. 14c).
Squeeze the release handle
located at the Top-rear of the
car seat and lift away from the
stroller (Fig. 14d).
Fig. 14c
Fig. 14d
THE INFANT CAR SEAT
14
WARNING:
Avoid serious injury from falling
or sliding out, always use the Infant Car Seat harness.
ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO
Infant Car Seats must attach to the module of the strollers front seat.
These models require child tray and seat back adjustment to the most
reclined position.
Align the car seat module to the inner frame connectors. Carefully rest
the car seats lower rear against the angle point of the tray. Latch the
module into the stroller frame. Press down firmly for the click.
ALWAYS
ensure that the car seat is properly connected and locked onto
the stroller before each use by lifting up on the car seat handle (Fig.14a).
Always
use the short clip to secure the infant car seat to the stroller
(Fig. 14b).
NOTE:
To make seat position adjustments refer to step 13.
Angle Point
Fig. 14a
FFigg.. 1144bb
AAnnggllee PPooiinntt
““CClliicckk””
