23
24
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Car Seat Connections:
Recline both seats as shown on step 11. Align the car
seat connection to the stroller connectors.
Both car
seats must be rear facing.
Carefully rest the car seats lower rear against the angle
point of the tray. Latch the connection into the stroller
frame. Press down firmly for the click.
ALWAYS
ensure that the car seat is properly connected
and locked onto the stroller before each use by lifting
up on the car seat handle (Fig. 12a).
Fig. 12a
Lower rear
Angle point
“Click”
“Click”
Front
Rear
Press
Fig. 12c
Fig. 12d
Removing the car seat:
NOTE:
Set handle to the carry position (Fig. 12c). Squeeze the release
handle located at the Top-rear of the car seat and lift away from the stroller
(Fig. 12d).
Applies to both front and rear.
IMPORTANT:
REAR SEAT:
Always use short clips to secure the infant car seat to the
stroller. (Fig. 12b).
NOTE:
Thread between canopy and stroller frame to
attach. Reverse to remove and store in the side pocket.
Fig. 12b
