33
34
5.0
FEATURES
5.0
FEATURES
9. From the rear of the Car Seat, pull
the Harness Straps through the
Slots until you have enough strap
to reach the Belt Adjuster Plate
(Fig. 34-1).
10. Ensure the harness strap ends are
fully hooked on the metal plate.
Both sides must be threaded in the
same position, position A
(Fig. 34-2).
11. Inspect the Harness Straps from
the front and rear to ensure that
they are not twisted. Twisted
straps can prevent proper
tightening of the Harness and thus
may not adequately restrain your
child in a sharp turn, sudden stop
or crash.
12. Before using the Safety Seat,
please pull on the Harness Straps
from the front to ensure that they
are securely reattached.
13. Fold webbing over metal plate and
secure with hook and loop fastener
(Fig. 34-3 Fig. 34-4).
5.11.2 Car Seat use of Fixed Back Shoulder Position.
-Low Birthweight Harness Routing continued
7. From the front of the seat, pull the
Harness Straps out through the
harness slots in the adjustable back
and seat pad (Fig. 33-1).
8. Position the Harness Strap over the
fixed back Harness Slot (Fig. 33-2)
and using the included Belt Threading
Tool, push the Harness Straps
through the Slots, in the seat pad and
the seat shell, repeat for the other
Shoulder Strap (Fig. 33-3).
Fig. 33-1
Fig. 34-1
Fig. 34-2
Fig. 34-3
Fig. 34-4
Fig. 33-3
Fig. 33-3
Belt Threading Tool
A
B
C
A
B
C
A
B
C
A
B
C
Summary of Contents for Secure-Lift 35
Page 36: ...69 70 NOTES NOTES...