3
4
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Unfold the toddler seat fully (Fig. 1a).
To assemble the toddler seat, unzip
the zipper fully, located underneath
the seat (Fig. 1b).
Unwrap the fabric from the tube (Fig.
1c).
(1)
Push the lower tubes into
the inner slot of the seat frame.
(2)
Ensure the push pin clicks into place
on both sides. Then wrap the fabric
back, and zip the zipper around the
sea frame.
If received unattached, follow below
instructions to attach:
Feed the strap through the tab to
anchor the seat fabric on the seat
frame, ensure the toddler seat is
secured (Fig. 1d). Repeat for the
other side.
ASSEMBLING THE TODDLER SEAT
1
Fig. 1a
Fig. 1b
Fig. 1d
Fig. 1c
Fig. 1e
Fig. 1g
Fig. 1f
Buckle Strap
Recline Seat Strap
Ensure the stroller adapters are
positioned on the middle level.
Attach the seat by lining up the seat
anchors on the side of the seat with
the anchors on the stroller frame and
pushing them together until they
click securely (Fig. 1e). The seat can
face in either direction, frontward or
backward.
Carriage Mode
Make sure the buckle strap
underneath the seat is unbuckled.
Then loosen the recline seat strap by
squeezing the adjuster and pulling
downwards (Fig. 1f). The carriage
should be fully extended before using.
NOTE:
The footrest area should be
unbuckled (Fig. 1g).
1
2