8
ENG
3.2 Powering the Parent Unit
• The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
• Connect the Parent Unit Power Adapter to the Charging Port
(18)
on the left side of the Parent Unit.
• Plug the AC power adapter into the wall outlet.
• Press and hold the Power button
(1)
on the top left side of the Parent Unit for 5 seconds to turn the unit on.
• Once the Parent Unit is turned on, the green power LED
(3)
will light up and “Babysense” logo will display on the LCD.
• Press and hold the Power button
(1)
on the top left side of the Parent Unit for 5 seconds to turn the unit off.
NOTE:
Only use the AC power adapter included in this package.
NOTE:
The Parent Unit is supplied with a built-in rechargeable Li-ion battery (3.8V 5000mAh).
We recommend whenever possible, keep the Parent Unit plugged in to keep the battery charged.
3.3 Charging the Parent Unit
• Connect the power adapter to the Charging Port
(18)
on the left side of the Parent Unit.
• Plug the AC power adapter into the wall outlet.
• Charging LED
(2)
on the Parent Unit will light up in RED to indicate charging.
• When the unit is turned on, the battery charging icon will appear at the top right corner of the LCD screen.
• Full battery indicator (4 fixed bars) will appear at the top right corner of the LCD screen, indicating the battery is fully charged. The charging LED
(2)
will turn red while the battery is charging. The charging LED
(2)
will turn green once the battery is fully charged.
NOTE:
Before the first use or after a long product storage, it is recommended to fully charge the Parent Unit prior to operating the monitor. It takes
approximately 8 hours to fully charge the battery.
NOTE:
The monitor can be operated normally during the charging process.
NOTE: Low Battery Warning -
The battery icon turns red on the LCD screen to indicate that the battery is low. The warning is accompanied with an
acoustic beep sound, indicating that the battery needs to be recharged.
* Alert Volume can be adjusted in the Parent Unit menu, see details in the section Warning Alert Volume Setting”.
