14
7. Demontaż fotelika
8. Montaż fotelika i zabezpieczanie dziecka - Grupa 2, 3
(Dotyczy grupy 2,3, waga 15-36 kg, wiek od 3 lat do 12 lat)
12
11
Pull the baby car seat outward,
and make sure both sides are
securely locked (Picture 21).
14
6.2 Children Fixation on 5-Point Harness System
( Applicable
for Group 1, Weight 9-18kg, Age 9 months - 4years old)
15
17
16
Extend the safety belt
push
the central adjuster with one hand
and pull outward the safety belts
b
c
d
e
with the other hand
(Note! Do not
pull the shoulder pad)
(Picture
15b).Press the red buckle button
and open the buckle (Picture15c).
Put the belt on two sides separately,
and place the baby inside the car seat
and make baby's shoulders go below
the belts (Picture 16d).Put two buckle
tongues together and insert them into
the buckle until you hear the
"Click"(Picture 16e).
Tighten the safety belt (Picture
17).
Press
Push
1
2
18
hook (Picture 18).
ISOFIX unlock key button, at the
same time, with the hand push
ISOFIX unlock button, red, is to
unlock, can make children car seats
and car seat(Picture 19).
Adjust the baby car safety seat
backrest to suit children height
(Picture 21).
19
21
20
(applicable for 2,3 group, 15-36 kg
body weight, age from 3 to 12 years old)
User manual
Baby safety seat
12
11
Pull the baby car seat outward,
and make sure both sides are
securely locked (Picture 21).
14
6.2 Children Fixation on 5-Point Harness System
( Applicable
for Group 1, Weight 9-18kg, Age 9 months - 4years old)
15
17
16
Extend the safety belt
push
the central adjuster with one hand
and pull outward the safety belts
b
c
d
e
with the other hand
(Note! Do not
pull the shoulder pad)
(Picture
15b).Press the red buckle button
and open the buckle (Picture15c).
Put the belt on two sides separately,
and place the baby inside the car seat
and make baby's shoulders go below
the belts (Picture 16d).Put two buckle
tongues together and insert them into
the buckle until you hear the
"Click"(Picture 16e).
Tighten the safety belt (Picture
17).
Press
Push
1
2
18
hook (Picture 18).
ISOFIX unlock key button, at the
same time, with the hand push
ISOFIX unlock button, red, is to
unlock, can make children car seats
and car seat(Picture 19).
Adjust the baby car safety seat
backrest to suit children height
(Picture 21).
19
21
20
(applicable for 2,3 group, 15-36 kg
body weight, age from 3 to 12 years old)
User manual
Baby safety seat
• Poluzować zaczep mocowania gór-
nego paska (rysunek 18).
• Odblokować złącze Isofix. Nacisnąć
czerwony przycisk odblokowania
złącza (rysunek 19).
• Złożyć elementy mocujące ISOFIX
(rysunek 20).
• Wyregulować pozycję oparcia do
wzrostu dziecka (rysunek 21).
14
13
22
Put the adjusted child car seat on the car seat, put the children in the child
car seat, pull out the car seat belt, let the car seat belt shoulder strap pass
through the headrest seat belt guide slot (Picture 22). Keep the belt
strap passing through the base belt guide slot, buckle up the car seat belt
buckle, until you hear "click"(Picture 23).
The car seat belt shall pass under the red base belt guide groove, not
through above the guide groove(Picture 24,25).
23
f
f
24
25
child car seat on the car seat is the
backrest of the car seat (Picture 26).
26
9.3 Dismantlement of cloth cover and 5 points harness
Put hands onto the bottom of the chair, and pull out the cover, then, it open
the back cover on the back of the chair(Picture27, 28).
Accidents happened when the car speed higher than 10km/h,may cause invisible
damage to the baby safety seat.Please change your baby safety seat after crash
accident.
Check all important parts regularly, make sure all mechanism functions properly.
To avoid damage, make sure no part of this baby seat is stuck bycar door , foldable
car seat or any other objects.
Store your baby car seat in safe place when not using. Avoid heavy objects, direct
sunshine or direct heat on it.
Cloth cover can be removed.Wash it with a mild detergent in warm water(water
temperature does not exceed 30
℃
)
,
natural dry
,
not dehydration.
Plastic parts can be cleaned with soap and water, do not use strong detergents
(such as solvent). Eat belt can apply mild soap to clean.
Shoulder strap can be removed with mild soap water to clean.
9.2 Cleaning of cloth cover
Do not use baby car seat without cloth cover.
9.1 Attention
27
28
User manual
Baby safety seat
14
13
22
Put the adjusted child car seat on the car seat, put the children in the child
car seat, pull out the car seat belt, let the car seat belt shoulder strap pass
through the headrest seat belt guide slot (Picture 22). Keep the belt
strap passing through the base belt guide slot, buckle up the car seat belt
buckle, until you hear "click"(Picture 23).
The car seat belt shall pass under the red base belt guide groove, not
through above the guide groove(Picture 24,25).
23
f
f
24
25
child car seat on the car seat is the
backrest of the car seat (Picture 26).
26
9.3 Dismantlement of cloth cover and 5 points harness
Put hands onto the bottom of the chair, and pull out the cover, then, it open
the back cover on the back of the chair(Picture27, 28).
Accidents happened when the car speed higher than 10km/h,may cause invisible
damage to the baby safety seat.Please change your baby safety seat after crash
accident.
Check all important parts regularly, make sure all mechanism functions properly.
To avoid damage, make sure no part of this baby seat is stuck bycar door , foldable
car seat or any other objects.
Store your baby car seat in safe place when not using. Avoid heavy objects, direct
sunshine or direct heat on it.
Cloth cover can be removed.Wash it with a mild detergent in warm water(water
temperature does not exceed 30
℃
)
,
natural dry
,
not dehydration.
Plastic parts can be cleaned with soap and water, do not use strong detergents
(such as solvent). Eat belt can apply mild soap to clean.
Shoulder strap can be removed with mild soap water to clean.
9.2 Cleaning of cloth cover
Do not use baby car seat without cloth cover.
9.1 Attention
27
28
User manual
Baby safety seat