12
2
Place the Baby-Walker upside down on a firm
surface. Fix the front wheel pins to the relevant
receptions until they engage (Fig. 1).
In order to use the Baby-Walker turn it back on its
wheels and place it on the ground. Slowly lift the
toy table and pull it towards the top. In doing this
hold the lower frame with one hand until you hear it
engage in the desired position in the frame.
Fasten the stops of the relevant mounting hole at
the frame (Fig. 3). Ascertain that the bolts of all
stops have made contact with the limit stop and
have engaged. Check all stops again whether
these have been inserted firmly and are mounted
correctly.
Subsequently attach the rear wheels with pins
to the relevant receptions until they also engage
audibly (Fig.2).
Assembly of Wheels / Seat
GB
1
2
3
