manualshive.com logo in svg

babymod 6922, Assembly And Operation Manual

Share
Download
babymod 6922 Assembly And Operation Manual Download Page 10

Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the 

steps below to install this anti-tipping strap.

FURNITURE ANTI-TIPPING KIT INSTALLATION

WARNING

Place heaviest item in the lowest drawers.

do not set TVs or other heavy objects on 

top of this product.

Never allow children to climb or hang on

drawers, doors, or shelves.

Never open more than one drawer at a time.

(OR)

Do not  defeat or remove the drawer interlock

system.

Use of tip-over restraints may only reduce,

but not eliminate, the risk of tip-over.

This is permanent label. Do not attempt to remove!

Unless specifically designed to accommodate,

Serious or fatal crushing injuries can occur 

from furniture tip-over. To help prevent 

tip-over:

X 2

X 1

X 1

X 1

Stubby

Screwdriver

Phillips

screwdriver

(not included)

Tools Needed

Pencil

Locate a 2” x 4” stud behind the wall, and make a 

mark.

15a

15b

Install the strap on the wall with long screw and washer.

2” x 4” wall stud

STEP 15.

Page 10

Summary of Contents for 6922












Reviews:

No comments

Brands by name

Popular brands

Load more brands