background image

         WARNING! RETAIN FOR FUTURE REFERENCE. TO 

AVOID SERIOUS INJURY OR DEATH PLEASE READ 

CAREFULLY AND FOLLOW ALL INSTRUCTIONS.

         WARNING! 

Parcels or accessory items, or both, placed     

         on the unit may cause the unit to become unstable.

         WARNING! 

Recommended maximum weight for the 

         accessory hooks not to exceed 7.5 lb (3.4 Kg).

         WARNING! 

Excessive weight applied to the accessory 

         hooks or the unit may cause a hazardous unstable   
         condition to exist.

         WARNING! NEVER LEAVE THE CHILD UNATTENDED.

 

         WARNING! 

Avoid serious injury from falling or sliding out. 

         

Always

 

use restraint system. 

         WARNING! 

Designed for Infants Only.  Age up to 3.5 

         years and weighing less than 50 Ib.  Keep one hand on   
         the child at all times. 

Lay child in the centre of the changing table and clip together 
the ends of the restraint belt. The belt should fit adequately so 
the child cannot roll off the table or slide out of the restraint 
belt. The restraint belt should never be tightened to the extent 
that it interferes with the breathing of the child.
To shorten or lengthen the restraint belt pull the buckle in the 
appropriate direction. 
• All assembly fittings shall always be tightened properly. 
• Follow mounting instructions carefully to assure secure 
mounting to various types of wall material.
• Be aware of the risk of open flame. Do not mount the unit 
near strong heat sources, such as electric furnaces, gas 
heaters, radiators and fireplaces, etc.
• 

ALWAYS 

check restraints to make sure they are securely 

fastened to the unit.
• Maximum weight of the child for use is 50 Ib (22.7 kg).
• This unit has a Changing Pad dispenser. Paper Changing 
Pads should be stocked regularly to provide a safe and 
sufficient barrier between the baby and changing bed.
• The Baby Changing Unit should be cleaned daily with a 
disinfectant cleaner.
• 
• 

Check mountings for tightness on a regular basis.
If in doubt about the adequacy of sub-strate strength carry out 

load test or confirm with a competent person.

MODEL: 

JBABYHOZII

B

8mm (0.31")

3mm (0.12")

8mm (0.31")

A

x4

B

x4

3

2

1

x4

x4

1

2

3

19.68" (500 mm)

9.84" (250 mm)

A

FLOOR

19.05" (484 mm)

52.95" (1345 mm)

15.75" (400 mm)

9.25" (235 mm)

FLOOR

45.89" (1

165 mm)

MODEL: 

JBABYVERT

A

B

EN

EN

   INSTALLATION GUIDE

BM_US_EN_020311 ISSUE A

 

Reviews: