HOW TO USE YOUR WAVING WAND
WARNING!
This appliance reaches up to 210°C, please take care to avoid the hot barrel
coming in to direct contact with the skin, in particular the ears, eyes, face and neck.
CAUTION!
Do not place the appliance on any heat sensitive surface whilst in operation.
Use the heat mat provided to protect the work surface whilst styling your hair.
•
Ensure your hair is completely dry and combed through before use.
•
press the button marked ‘i/0’ to switch the styler on. The temperature display panel
will begin to flash 160°C.
•
The styler will automatically adjust to the 160°C temperature setting each time it is
switched on and this will be displayed on the LCD screen.
IMPORTANT!
within 4 seconds of turning the styler on, the temperature setting will
automatically lock. You are able to adjust the temperature setting immediately after
switching on the styler, however if the temperature locks, hold down either the ‘+/-’
buttons for 1-2 seconds to change the temperature.
•
The temperature increases in 5°C increments for specific temperature control
(160°C-210°C).
NOTE:
always start with a lower temperature setting and increase
gradually if required.
•
The temperature on the display will flash while the styler is heating up to the selected
temperature. You may still change the temperature setting at this time.
•
when the selected temperature has been reached, the temperature display will stop
flashing.
Summary of Contents for Titanium Expression WAVING WAND
Page 1: ...wav i n g WAN D T I T ANI U M E x p r e s s i o n ...
Page 2: ...BAB2871U ...
Page 16: ......
