Step 2.
Tighten the tension screws to hold the blade in place.
Step 3.
Push the blade guide up as far as the adjustment tool
allows, so the moving blade sits closely with the top of
the adjustment tool. The blades will now be flush with
each other.
Step 4.
Using the screwdriver, tighten the tension screws to
hold the blade in place.
Step 5.
Remove the blade from the adjustment tool by gently
pushing the blade from the opposite side.
blade guide
REGULAR - Resetting the blade for regular use
Step 1
Before placing the blade into the adjustment tool, use the screwdriver provided to
loosen the tension screws, without removing them completely from the blade holder.
Place the blade into the adjustment tool in the side marked Regular.
The tool will automatically push the moving blade down to its regular postion.
FX788RG IB-15428.indd 9-10
3/14/18 2:40 PM
