USER MAINTENANCE
Your iron is virtually maintenance-free. No lubrication is needed. Keep all vents and
openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from
the power source, let it cool and wipe exterior with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service
representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around
the unit. Damage will occur at the high flex point of entry into the unit, causing it to
rupture and short. Inspect the cord frequently for damage. Stop use immediately if
damage is visible or if unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then simply put back
in the box, and store out of reach of children in safe, dry location. Do not jerk or strain
cord at plug connections.
NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART
TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS
THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF
POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
Everyone knows that electricity and water are
a dangerous combination, but did you know
that an electrical appliance is still electrically
live even if the switch is off? If the plug is in,
the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES.
KEEP AWAY FROM WATER
WARNING:
IF YOU THINK THE POWER IS OFF
WHEN THE SWITCH IS OFF,
YOU'RE WRONG.
BABNT2071UZ
IB-9992C.indd 8-9
6/21/18 3:39 PM
For additional protection, the installation of a residual current device (RCD) having a
nominal residual operating current not exceeding 30 mA is recommended in the
electrical circuit feeding the bath. Ask your installer for advice.
