IMPORTANT!
Do not place the appliance directly onto any heat
sensitive surface whilst in operation. Use the heat wrap provided to
protect the work surface whilst styling your hair.
GENERAL OPERATING INSTRUCTIONS
• Ensure hair is dry and combed through.
• Press the ‘I/0’ button to switch the styler on.
• The styler will automatically heat up to 180°C, once it’s reached this
temperature the digital display will remain at 180°C.
Note:
There may be a slight buzzing sound from the ionic port as it
releases the ions. This is normal.
• Use the temperature buttons (+/-) to select the preferred
temperature. The temperature increases in 10°C increments for
specific temperature control (140°C-230°C).
• Once the preferred temperature has been selected the digital display
will flash 3 times and start heating up. When the chosen temperature
has been reached the styler is ready for use.
• After use, press the ‘I/0’ button to switch off and unplug the styler.
• Immediately wrap in the heat mat provided and allow to cool.
• Allow the styler to cool down fully before storing away.
STYLING ADVICE
Straightening
• Ensure hair is dry and combed through.
• Divide hair into sections and place the section between the plates,
close to the roots.
• Gently slide the plates down the length of the hair. To create some
shape at the ends of the hair, slightly bend your wrist inwards or
outwards as you reach the end of each section.
• Repeat as necessary through the remaining sections of your hair.
• Use the heat protection mat to place your styler on between each
section to protect surfaces.
• Allow the hair to cool fully before combing through.
