• To attach a head, align the slots on the head with the ribs on both sides of
the trimmer unit as shown below, until it meets the magnet and is securely
held in place.
Comb Guides
This appliance is supplied with 11 comb guides for use with the Precision
Trimmer and Power Trimmer blades.
Note:
The Precision Trimmer and Power Trimmer can be used without any
comb guides and will cut to a length of 0.2mm.
Attaching the comb guides to the trimmer
• Slide the trimmer teeth and the top of the blades into the space under
the comb guide. (Fig. 1)
• Click the guide into position by gently pressing the back of the guide
down onto the back of the blade. (Fig. 2)
• The comb guide should click under the back of the metal blade.
Using the trimmer without the comb guide
The Precision Trimmer and Power Trimmer
blades can be used to edge and detail or to get
a much closer cut (0.2mm).
• To remove the comb guide, squeeze the sides
of the comb guide, which will release the back
from the blade.
• Lift the guide away.
Fig. 1.
Fig. 2.
