BaByliss True Smooth Radiance 200, Instruction Manual

Page: 23 / 32

23
Follow these steps
1. To activate Glide mode, repeat steps 1 and 2 for Precision mode.
Then correctly place the application surface of Radiance 200 against
your skin whilst holding down the trigger button on the device.
2. Glide Radiance 200 over your skin without interruptions, in a
slow, continuous movement, without making any up or down
movements.
N.B.:
• If you remove Radiance 200 from your skin whilst holding down the
trigger button, it will stay in Glide mode. However, for your own safety,
the pulsed light will only be released if Radiance 200 is in full contact
with your skin. You should ensure that the application surface of
Radiance 200 is in full contact with your skin in order to allow it to glide.
• If the application surface of Radiance 200 is not in full contact with your
skin, you will have 5 seconds in which to ensure that Radiance 200 is in
full contact, whilst holding down the trigger button. If that window of 5
seconds is exceeded and there is still not complete contact with the skin,
Glide mode will be deactivated. Release the trigger button and press it
again to reactivate Glide mode.
• If you lift up the device and release the trigger, Glide mode will be
deactivated.
Glide mode is suitable for people who already have some experience
and proficiency when using Radiance 200. With 36 pulses per minute
(at level 1), Glide mode provides safe and fast treatment of larger areas
of the body (legs, back, arms, torso). For sensitive areas and the face,
you should use Precision mode.