Switch Activation Control
IMPORTANT! This appliance features delayed activation control.
Immediately after turning the appliance on, you are able to adjust the
temperature settings. After 5 seconds of the appliance being on, the
temperature buttons will automatically lock. To adjust the heat settings,
hold down the ‘+/-’ button for 1-2 seconds. This will deactivate the lock
mode and allow the settings to be changed. To turn off the appliance
whilst in lock mode, hold down the button marked
‘ ’
for 1-2 seconds
until the appliance switches off.
INSTRUCTIONS FOR USE
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling.
• Press and hold the button marked
‘ ’
for 1-2 seconds to turn the
appliance on. The digital display will start flashing and the appliance will
automatically start heating up.
• Press the ‘+/-’ button to select a heat setting suitable for your hair type.
The digital display will flash until the selected heat setting has been
reached. Once the temperature has been reached, the digital display
will remain solid in colour.
Please note: The appliance temperature settings will automatically
lock after 5 seconds. (See ‘Switch Activation Control’).
Please note: Before styling, make sure the universal heat glove is
worn on the hand which is wrapping the hair around the barrel.
• Take a section of hair, starting 2 inches from the scalp and place the
appliance next to the hair section, ensuring the end of the appliance is
pointing downwards towards the shoulder.
• Start winding the hair around the top part of the barrel, closest to the
handle. Keep winding the hair down the length of the barrel until there
is no more hair to wrap around.
• Hold the end of the hair in place for 5-8 seconds depending on your
hair type. Then unwind or release the section of hair and pull the
appliance away.
• Allow the curl to cool before styling.
• Repeat for each section of hair.
Summary of Contents for TITANIUM BRILLIANCE 2356U
Page 9: ...IB 19 176B...
