• Prior to use always inspect the head for warts, moles, spots and
broken skin. If using the clipper on yourself either use mirrors or ask
another person to check for you. Special care should be taken when
cutting hair in areas that have warts, moles, spots or broken skin, to
prevent injury.
• Remove any head jewellery such as earrings and necklaces before
use.
NOte:
The appliance should not be used for longer than 20 minutes
when operated from the mains.
wArNINGS:
The clipper is for use only on the head. Never use the clipper on the
face or any other area of the body.
IMpOrtANt:
Do not attempt to trim hair close to your ears with the
clipper. Never allow ears to enter the ring of the clipper blade.
A separate trimmer has been provided to trim around the ears, the
neckline and sideburns.
CLIppING
• Attach the comb guide and select the cutting lengths e.g .1=3mm,
2=6mm, 3=9.5mm and 4=12mm.
• Switch on the clipper using the on/off sliding switch located on top
of the clipper and the blades will start to move and the green LED
will illuminate.
• Begin cutting on the top of your head. Slowly and gently steer the
clipper around the scalp, taking care on areas where there may be
warts, moles, spots and broken skin and keep away from the ears.
For best results use in a sweeping motion:
• The clipper can be moved in any direction to cut your hair, for best
results we advise you start cutting the back of the head and with
a sweeping motion run from the back to the front of your head
concentrating on one area until you reach the desired length.
• Once you have completed this over your whole head you should then
