INSTRUCTIONS FOR USE
• Ensure hair is dry and combed through to remove any tangles. Divide
the hair into sections ready for styling.
• Press the button marked to switch on.
•
Rotate the temperature dial to select the desired straightening
temperature. The red indicator light will blink until optimum
temperature has been reached.
• Place a section of hair between the straightening plates, close to the
roots.
• Hold the hair firmly between the straightening plates and slide down
the length of the hair, from root to tip.
• Repeat as necessary.
• Allow the hair to cool before combing through.
• After use, press the button marked to switch off and unplug the
appliance.
• Allow to cool before storing away
Heat Settings
If you have delicate, fine or coloured hair, use the lower heat setting.
For thicker hair, use the higher heat setting.
It is suggested to always complete a test on initial use to ensure the
correct temperature is used on the hair type. Start on the lowest
setting and increase the temperature until desired result is achieved.
Below is a guide of the temperature settings:-
1-9 = 150°C-180°C
9-13 = 180°C-200°C
13-20 = 200°C-235°C
Auto Shut Off
This appliance has an automatic shut off feature for added safety. If the
appliance is switched on for more than 72 minutes continuously, it will
automatically switch off. If you wish to continue using the appliance
after this time, simply press the button to turn the power on.
