Oiling Instructions
• For optimum cutting performance, it is highly recommended to oil the
blades after every use.
• When using the oil for the first time, unscrew the cap and cut off the
very end of the plastic tube with a pair of scissors.
• Remove the blade guard and switch the appliance on.
• Holding the trimmer at a 45 degree angle, gently squeeze the oil tube
and apply 2 drops directly onto the blades.
• Leave the unit on for a further few seconds to allow the oil to
thoroughly spread along the length of the blades.
• Switch off the unit and remove any excess oil by gently dabbing with
a cloth before using on hair.
Charging the appliance
• This trimmer is equipped with Ni-MH batteries.
• Before using for the first time, the appliance should be fully charged
continuously for 8 hours. This initial super-charge ensures optimum
power performance to ensure smooth fast cutting every time.
• Maximum battery capacity will only be reached after 3 charging and
discharging cycles.
• Ensure the appliance is switched off.
• Plug the charging adapter into a suitable mains power socket and
switch on at the wall. The charging indicator light will illuminate when
the appliance is charging. When the battery is fully charged the LED
light will turn off.
Note:
Always ensure the trimmer is in the I/0 ‘OFF’ position when
charging.
• A full 8 hours charge will supply enough power for 70 minutes of use.
• Subsequent charges should be for 8 hours.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries,
the trimmer should be fully discharged and then recharged for 8 hours
every 3 months.
