device (RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
•
WARNING!
Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
• Do not immerse the appliance into water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the appliance
has been dropped. In the event of damage, discontinue
use immediately. Contact the Conair Customer Care
Line (refer to ‘UK After Sales Service’ section for further
information).
• Do not use the appliance if the lead is damaged. In the
event of damage, discontinue use immediately. If the lead
is damaged it must be replaced by the manufacturer.
Return the appliance to the Customer Care Centre (refer
to ‘UK After Sales Service’ section for further information).
No repair must be attempted by the consumer.
• Do not leave the appliance unattended when switched
on or plugged in.
• During use, do not place the appliance on any heat
sensitive surface, even when using the heat mat provided.
•
WARNING!
Only hold the handle during use. Do not touch
the hot surfaces of the appliance when in use as these
can be extremely hot.
• Take care to avoid the hot surface of the appliance coming
into direct contact with the skin, in particular the eyes,
ears, face and neck.
