48
EN
B. Performing a test with Homelight®
48 hours before the first use, you should perform a test with
Homelight® on one leg (a few light pulses), selecting intensity level 1
regardless of your skin type.
C. Select the required level of intensity for your phototype
If your skin responds to the test correctly, and if you have still not
experienced any abnormal reaction or discomfort after 48 hours
following the test, you can gradually increase the level of intensity of
your Homelight® during subsequent depilation sessions in line with
the following guide:
For people with phototype I:
• First session:
- set Homelight® no higher than intensity level 1.
• Second and third sessions:
- if you did not experience any particular discomfort or pain
during the previous session, you can set intensity level 2
for the second session and intensity level 3 for the third
session.
• Fourth session and subsequent sessions:
- only if there have been no side effects whatsoever resulting
from the previous session, you can set intensity level 4
for the fourth session and intensity level 5 for subsequent
sessions.
For people with phototype II or III:
• First session:
- set Homelight® no higher than intensity level 1.
• Second session:
- if you did not experience any particular discomfort or pain
during the previous session, you can set intensity level 2.
G945-G946E IB 1.indd 48
02/06/2015 11:31 AM
Downloaded from www.vandenborre.be
