BaByliss GRAPHITE PRECISION T987U, Manual

Page: 6 / 12

Cordless Operation
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch on. The indicator LED will illuminate when
the adaptor is correctly inserted into the appliance and connected to
the mains.
• Once the appliance is fully charged, the indicator LED will stay on.
Unplug the adaptor from the mains socket and appliance and prepare
for use.
• A full charge provides 60 minutes of cordless use.
Using the Length Control Dial
The length control dial allows you to adjust the
comb guide to change the cutting length of your
trimmer. You’ll need to experiment to find your
preferred length, but as a guide, 1mm will give
you a very short stubble beard and 12mm will
be thicker and longer.
• Select a cutting length (1-12mm) using the
dial on the front of the trimmer. Turning the
dial clockwise will increase the cutting length.
Turning it anti-clockwise will decrease the
cutting length.
• Once you have selected your desired cutting
length, the guide automatically locks into
position for a guaranteed, even cut.
• Switch the trimmer on by sliding the power
button up, the blades will start to move and
you can begin trimming.
Using the trimmer without the comb guide
• The trimmer can also be used for detailing/shaping around the edge
of the beard.
• To remove the comb guide, place two fingers either side of the wheel
and gently pull to the guide.
• Pull the guide up and away from the trimmer unit.