BaByliss CURL & WAVE TRIO, Manual

Page: 5 / 12

• If there is resistance, check the locking ring is rotated as far as
possible to the release position marked with the unlock symbol.
• Once the attachment is in place, secure it by turning the locking ring
as far as possible to the left to the lock position marked with the lock
symbol.
Removing The Attachments
IMPORTANT!
Before fixing or removing any attachments, ensure the
appliance is cool, switched off and is unplugged.
• Turn the lock ring as far as possible to the release position marked
with the unlock symbol .
• Pull the attachment from the handle.
Instructions for use - Oval and Conical Wand barrel attachments
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Wind the hair around the barrel at a slight angle, so the hair wraps
around the chosen barrel in a spiral motion. As you wind the hair
around the barrel, ensure the hair is distributed evenly so the entire
section is touching the barrel, try not to overlay the hair. If using the
conical barrel attachment, start winding hair at the thicker portion of
the barrel.
• Hold in place for 5-10 seconds depending on the texture and length
of your hair.
• To remove the appliance from the hair, pull appliance away.
• Allow the curl to cool before styling.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
Instructions for use - Twisted Wand
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• To create texture through the hair, wind each section around the barrel