pointing down towards the shoulder.
• Start winding the hair around the top part of the barrel closest to the
handle. Keep winding the hair down the length of the barrel until there
is no more hair to wrap around.
• Hold the end of the hair in place for 5-8 seconds depending on your
hair type. Then unwind or release the section of hair and pull the
appliance away.
• Allow the curl to cool before styling.
• Repeat for each section of hair.
• After use, press and hold the ‘
FOR POSITION ONLY:
ON/OFF S/A: MOLD ON
200% VIEW
BABYLISS LOGO: BLACK SPOT UV
Babyliss-Fr
C456E
Personal Care
Katty Zhao
03/20/19
25MM
25MM
CL
(PER VENDOR)
(PER VENDOR)
’ button for 1-2 seconds to switch off
and unplug the appliance.
• Allow the appliance to cool before storing away.
Heat Settings
If you have delicate, fine, bleached or coloured hair, use the lower heat
settings. For thicker hair, use the higher heat settings. It is suggested to
always complete a test on initial use to ensure the correct temperature
is used on the hair type. Start on the lowest setting and increase the
temperature until the desired result is achieved.
There are 6 temperature settings to select from; 160°C, 170°C, 180°C,
190°C, 200°C and 210°C.
Auto Shut Off
This appliance has an automatic shut off feature for added safety. If the
appliance is switched on for more than 60 minutes continuously, it will
automatically switch off. If you wish to continue using the appliance after
this time, simply press and hold the ‘
FOR POSITION ONLY:
ON/OFF S/A: MOLD ON
200% VIEW
BABYLISS LOGO: BLACK SPOT UV
Babyliss-Fr
C456E
Personal Care
Katty Zhao
03/20/19
25MM
25MM
CL
(PER VENDOR)
(PER VENDOR)
’ button for 1-2 seconds to turn
the power on again.
Heat Mat
The appliance comes with a heat mat for use during and after styling.
During use, do not place the appliance on any heat sensitive surface,
even when using the heat mat provided. After use, switch off and unplug
