creates long, lasting volume.
9) To release the section, move the switch back to setting ‘I’ or ‘II’
then press and hold the opposite rotation button to unwind the hair
section.
10) Repeat as necessary.
11) After use, switch off and unplug the appliance.
12) Allow to cool before storing away.
13) Place protective shield over brush head to protect the bristles.
Please see the ‘Protective Cover’ section for direction.
Helpful Hints and tips
• To define layers and add shape to the ends of the hair, follow steps
5 - 6 and repeat through the sections.
• To get root volume and body through the top section of hair, follow
steps 7 - 9 using an upward motion.
CLeANING & MAINteNANCe
To help keep your appliance in the best possible condition follow the
steps below:
General
• Do not wrap the lead around the styler, instead coil the lead loosely
by the side of the dryer.
• Do not use the styler at a stretch from the power point.
• Always unplug after use.
Cleaning & Maintenance
• Unplug the appliance and let cool completely before cleaning it.
• Holding the handle of the appliance firmly pull the top of the rear filter
towards you, this will enable the rear filter to open.
• Using a soft brush, clean any hair and other debris from the filter.
• Replace the rear filter by pushing back into position.
• To clean the outside of the styler, wipe with a damp cloth. Make sure
no water enters the styler and it is completely dry before use.
Summary of Contents for BIG HAIR 2775U
Page 1: ...Model 2775U BIG HAIR ...
Page 10: ......
