BaByliss 7898U, User Manual

Page: 6 / 12

• When LED display has less than 5 minutes left, the time symbol
indication will change to red.
preparation for Use
Always inspect the super stubble before use to ensure the cutting head
is free from hair and debris and is running smoothly.
Operation
To switch the super stubble on, press the O/I button. The LED will
also show the selected cutting height and approximate usage time
remaining. After 10 seconds, the blue LED for the usage time remaining
will be switched off but cutting height LED will be kept illuminated whilst
the motor runs. When there is approximately 5 minutes left shown on
the LED display, the time symbol will change colour to red and will
also start to flash. When the LED displays «00», this indicates that the
unit needs to be recharged, however it may continue to run for a short
while after.
Using the comb guide
The comb guide allows you to change the cutting length of your
trimmer. You’ll need to experiment to find your preferred length, but as
a guide, 0.4mm will give you very short stubble, whilst 1.6mm will give
you a longer stubble look. 2mm+ will give you a short beard.
• Ensure the comb guide is correctly positioned by pushing the comb
guide gently downwards to secure into place.
• Use the digital touch control ‘‘up’’ or ‘‘down’’ buttons to adjust the
telescopic comb guide to the required length.
• The cutting lengths are displayed on the LED screen in ‘‘mm’’ – scroll
through the available length settings with the digital touch controls.
There are 24 length settings available: 0.4mm-5.0mm in 0.2mm
increments
• Select your required length – the length setting will then remain
displayed on the LED screen.
• Press the power button to switch the super stubble on.