Oiling Instructions
• For optimum cutting performance, it is highly recommended to oil the
blades after every use.
• When using the oil for the first time, unscrew the cap and cut off the
very end of the plastic tube with a pair of scissors.
• Remove the blade guard and switch the appliance on.
• Holding the trimmer at a 45 degree angle, gently squeeze the oil tube
and apply 2 drops directly onto the blades.
• Leave the unit on for a further few seconds to allow the oil to
thoroughly spread along the length of the blades.
• Switch off the unit and remove any excess oil by gently dabbing with
a cloth before using on hair.
Charging the appliance
• This trimmer is equipped with lithium ion batteries.
• Before using for the first time, the appliance should be fully charged
continuously for 3 hours. This initial super-charge ensures optimum
power performance to ensure smooth fast trimming every time.
Maximum battery capacity will only be reached after 3 charging and
discharging cycles.
• Plug the charging adapter into a suitable mains power socket and
switch on at the wall. A blue LED light will continuously flash whilst
the product is charging. When the battery is fully charged the blue
LED light will stop flashing and remain alight.
Note:
Always ensure the trimmer in the I/0 ‘OFF’ position when
charging.
• A 2 hour charge will provide 120 minutes of cordless use. A 20 minute
quick charge will provide approximately 20 minutes use.
IMPORTANT!
Only use the adaptor and attachments supplied with
this appliance. Please note, if the wrong adaptor is used, the blue LED
will blink continuously. Once the wrong adaptor is removed the blue
LED will continue to blink for some time after removal. This is normal.
