INStrUCtIONS FOr USe - trIMMer
• The battery compartment cover is located on the underside of the
trimmer.
• Push the tab downwards and slide it open, then remove the cover.
• Insert 2xAA batteries as indicated in the battery compartment.
• Replace the battery cover by placing it over the compartment and
slide up until it clicks shut.
• If the appliance remains unused for a while or if the batteries have
run down, remove them from the appliance. This will increase the life
of the product.
• When the batteries have run down, they should be disposed of at a
recycling centre to safeguard the environment. If the batteries leak
avoid touching them and dispose of them at a recycling centre.
preparation for Use
• Always inspect the appliance before use for noticeable signs of
damage. Do not use if damaged. (see UK After Sales Services)
• Ensure the heads are free from hair and debris and that the blades are
properly oiled (refer to Cleaning & Maintenance of Trimmer section
for further information).
• Use on clean, dry hair that is tangle-free.
trimming
to trim hair
• Ensure the appliance is switched off.
• Attach the 5-position comb guide as required. This provides the
following cutting lengths (3, 6, 9, 12, 15mm).
• Slide the comb guide onto the front of the Precision Trimmer head
until the guide can be pushed no further.
• The 5-position comb guide will be set to the shortest of the five
cutting lengths.
• To adjust the cutting length, push and click the guide forward to
the required position as marked on the side of the comb guide i.e
1=3mm, 2=6mm, 3=9mm.
• To remove the comb guide, push the guide forward and off the