background image

immediately and and contact the Conair Customer 
Care Line (refer to ‘UK After Sales Service’  section for 
further information).

•  Do not use the appliance if the lead is damaged. In the 

event of the appliance being damaged, discontinue 
use immediately and contact the Conair Customer 
Care Line (refer to ‘UK After Sales Service’  section for 
further information).

•  Do not leave the appliance unattended when switched 

on or plugged in.

•  This unit is equipped with a safety thermostat.  In the 

event of overheating the appliance will either stop 
automatically or run hot and cold intermittently.  Should 
this happen, switch the dryer to the ‘‘0’’ position, 
unplug and allow to cool for 10 minutes.  Before use, 
ensure the rear filter is clear of hair and other debris.  
Plug in and switch on. If the appliance continues to 
overheat discontinue use immediately, switch off and 
unplug and contact the Conair Customer Care Line 
(refer to ‘UK After Sales Service’  section for further 
information).

•  Take care that the air vents do not become blocked 

when in use. Ensure the rear filter is clear of hair and 
other debris before use.

•  Do not place the appliance on any heat sensitive 

surface whilst in operation.

•  Take care to avoid the hot surface of the appliance 

coming into direct contact with the skin, in particular 

Summary of Contents for 5168U













Reviews: