- Use setting ‘I’ for cooler drying and less heat - ideal for shorter
styles and finer hair.
- Use setting ‘II’ for faster drying and more heat - ideal for long
styles and thicker, more coarse hair.
• Separate your hair into manageable sections and place the brush
head under the section of hair, as close to the roots as possible.
• Use the brush to lift the hair at the roots as you dry.
• Move the styler down through the hair, gently brushing as you dry.
• Finally, select the cool setting ‘ * ’ to set your style.
• Repeat across all sections until hair is dry and the desired style is
achieved.
• After use, switch off the styler and remove plug from socket.
• Allow to cool before storing away.
Maximum Volume and Body
• For added root lift and for creating body and volume attach one of
the thermal brush heads. Place it into the hair close to the roots;
hold the brush in place at the roots for a few seconds before gently
moving the styler slowly down the hair.
• To create shape at the ends of the hair, run the brush head from the
root to the ends. As you reach the end of the section rotate the brush
head turning the ends of your hair inward to achieve a turned in style
or alternatively rotate the brush outwards for a flicked out style.
• The cool setting is used at the end of styling to set the style and give
long-lasting effect. Once you have finished styling your hair, move
the slide switch to the cool position ‘*’ and brush through the section
of hair. The cool air helps lock in the style.
Changing the Attachments
• To change the attachment, place over the handle so that the small
cut out area goes behind the buttons, push the attachment on to the
handle until it clicks into place.
• To remove the attachment, press and hold the two buttons and pull
the attachment away from the handle.
