Heat Settings
There are 2 heat settings for general styling and a cool setting. Use
the cool setting on warm hair to set the style and achieve lasting effect.
Slide the ‘on/off’ switch to the first position for the cool setting ‘*’ , the
second position for the low heat ‘I’ and the third position to select high
heat ‘II’.
If you have delicate, fine or coloured hair, use the lower heat setting.
For thicker hair, use the higher heat setting.
CARE & MAINTENANCE
To help keep your appliance in the best possible condition follow the
steps below:
• Ensure the appliance is switched off, unplugged and cool. To clean
the outside of the appliance, wipe with a damp cloth. Make sure that
no water enters the appliance and it is completely dry before use.
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.
Cleaning the Rear Filter
• Unplug the appliance and let it cool completely before cleaning it.
• Holding the handle of the appliance firmly twist the rear filter anti-
clockwise until the raised rib aligns with the ‘‘open’’ arrow on the
appliance housing.
• Using a soft brush, clean any hair and other debris from the filter.
• Replace the rear filter by twisting back into position until the rear filter
clicks into place.
For more information on this appliance visit www.babyliss.co.uk
