exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
• WARNING!
Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
•
Do not immerse the appliance into water or other
liquids.
•
Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the
appliance has been dropped. In the event of damage,
discontinue use immediately. Contact the Conair
Customer Care Line (refer to ‘UK After Sales Service’
section for further information).
•
Do not use the appliance if the lead is damaged. In
the event of damage, discontinue use immediately.
If the lead is damaged it must be replaced by the
manufacturer. Return the appliance to the Customer
Care Centre (refer to ‘UK After Sales Service’ section
for further information). No repair must be attempted
by the consumer.
•
Do not leave the appliance unattended when switched
on or plugged in.
•
During use, do not place the appliance on any heat
sensitive surface, even when using the heat wrap
provided.
• WARNING!
Only hold the handle during use. Do not
touch the hot surfaces of the appliance when in use as
these can be extremely hot.
•
Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular