Switch Activation Control
IMPORTANT!
This appliance features delayed activation control.
Immediately after turning the appliance on, you are able to adjust the
temperature settings. After 5 seconds of the appliance being on, the
temperature buttons will automatically lock. To adjust the heat settings,
hold down the ‘+/-’ button for 1-2 seconds. This will deactivate the
lock mode and allow the settings to be changed. To turn off the
appliance whilst in lock mode, hold down the button marked ‘ ’ until
the appliance switches off.
INSTRUCTIONS FOR USE
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling.
• Press and hold the button marked ‘ ’ for 1-2 seconds to turn the
appliance on. The digital display will start flashing and the appliance
will automatically start heating up.
• Press the ‘+/-’ button to select a heat setting suitable for your hair
type. The digital display will flash until the selected heat setting has
been reached. Once the temperature has been reached, the digital
display will remain solid in colour.
Please note:
The appliance temperature settings will automatically
lock after 5 seconds. (See Switch Activation Control).
• Pressing the lever, place the appliance midway up a section of hair
and spread the hair evenly between the lever and barrel.
• Once the hair is in place, carefully release the lever, securing the hair
between the lever and the barrel. Gently slide the appliance down to
the end of the hair.
• Wind the hair around the barrel at a slight angle, so the hair wraps
around the barrel in a spiral motion. As you wind the hair around
the barrel, try not to overlay the hair and ensure the hair is distributed
evenly so the entire section is touching the barrel.
• Hold in place for 5-8 seconds, depending on your hair type.
• To remove the appliance from the hair, press the lever and pull the
appliance away.
• Allow the curl to cool before styling.
