INSTRUCTIONS FOR USE
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling.
• Press the button marked ‘I/0’ to turn the appliance on.
• Press the ‘+/-’ button to select the suitable heat setting for your hair
type.
• Allow the styler to heat up for a few seconds, allowing slightly longer
for higher temperatures.
• Take a section of hair, starting 2 inches from the scalp and place the
appliance next to the hair section, ensuring the end of the appliance is
pointing down towards the shoulder.
• Start winding the hair around the top part of the barrel closest to the
handle. Keep winding the hair down the length of the barrel until there
is no more hair to wrap around.
• Hold the end of the hair in place for 5-8 seconds depending on your
hair type. Then unwind or release the section of hair and pull the
appliance away.
• Allow the wave to cool before styling.
• Repeat for each hair section.
• After use, press the ‘I/0’ button to switch off and unplug the appliance.
• Allow to cool before storing away.
Heat Settings
If you have delicate, fine or coloured hair, use the lower heat settings.
For thicker hair, use the higher heat settings. It is suggested to always
complete a test on initial use to ensure the correct temperature is used
on the hair type. Start on the lowest setting and increase the temperature
until desired result is achieved.
There are 5 temperature settings to select from 210°C, 195°C, 180°C,
165°C and Power (150°C).
