BaByliss 2199U, Manual

Page: 5 / 12

IMPORTANT! The Boutique Salon Control 235 straightener has a high
performance Advanced Ceramics™ heater and is designed to reach
very high temperatures. If the maximum setting is too hot for the hair
type then select a lower temperature setting. Always start with a lower
heat setting, working up to a higher setting.
CAUTION!
This is a high heat appliance. Care must be taken to avoid
the hot surfaces including the housing around the outside of the plates
coming into direct contact with the skin, in particular the eyes, ears,
face and neck.
Straightener Storage
The straightener comes in a soft bag which can be used as a storage
pouch. This bag is not heat resistant so any heated appliance placed in
the bag should be completely cool before storing away. Alternatively,
once the straightener has completely cooled down, wrap the
straightener in the heat protection wrap before placing into the pouch
and storing away.
INSTRUCTIONS FOR USE
• Ensure hair is dry and combed through.
• Press the ‘I/0’ button once to switch the appliance on.
• Once the straightener has been turned on the digital display will heat
up to 180°C in seconds, once it’s reached this temperature the digital
display will stop flashing.
• Use the temperature buttons (+/-) to select the preferred temperature.
The temperature increases in 5°C increments for specific temperature
control (between 180°C to 235°C).
• Once you have selected the preferred temperature the chosen
setting will flash 3 times and then start heating up to the temperature
requested.
• After use, press the ‘I/0’ button to switch off and unplug the appliance.
• Allow the appliance to cool down before storing away. For extra
protection wrap the appliance in the heat wrap before storing away.