BaByliss PRO BAB8705U, Manual

Page: 6 / 20

WEEE - END-OF-LIFE ELECTRICAL AND ELECTRONIC
EQUIPMENTS
In everybody’s interest and to actively participate in protecting the
environment and human health:
• Do not discard your products with your unsorted household wastes.
• The WEEE (Waste electrical and electronic equipment) must be
collected separately.
• Use the return and collection systems dedicated to the WEEE
available in your area. In this way, some materials can be recycled,
re-used or recovered.
• By ensuring this product is disposed of properly, you will help prevent
potential negative consequences for the environment and human
health due to possible content of hazardous substances.
For more detailed information about the disposal of this product,
please contact your local household waste disposal service.
PREPARATION FOR USE
General
• Always inspect the appliance before use to ensure the clipper and
trimmer blades are free from hair, debris etc.
• Use on clean, dry hair that has been combed until tangle-free.
Oiling Instructions
• For optimum cutting performance, it is highly recommended to oil the
blades after every use.
• When using the oil for the first time, unscrew the cap and cut off the
very end of the plastic tube with a pair of scissors.
• Remove the blade guard and switch the appliance on.
• Holding the clipper/trimmer at a 45 degree angle, gently squeeze the
oil tube and apply 2 drops directly onto the blades.
• Leave the unit on for a further few seconds to allow the oil to
thoroughly spread along the length of the blades.
• Switch off the unit and remove any excess oil by gently dabbing with
a cloth before using on hair.
• To attach a comb guide, ensure the appliance is switched off. Position