INSTRUCTIONS FOR USE
General
• The rollers can be used on damp or dry hair.
• Place the appliance on a level, heatproof surface.
WARNING!
Do not open the lid until the rollers are fully heated.
• Turn the appliance on by sliding the switch to either the ‘I’ or ‘II’ position,
depending on the heat setting required. There are two heat settings,
a low heat setting (I) and a high heat setting (II). Use the lower setting
for delicate, fine or coloured hair. For thicker hair, use the higher heat
setting.
• Allow the rollers to heat up for approximately 5-10 minutes.
• Comb the hair thoroughly, open the roller set lid and choose one of
the 4 sizes of rollers, depending on the curl or style desired.
WARNING!
Do not touch the hot metal parts of the appliance during
use.
• Start with the top section of the hair first and work down towards the
nape of the neck.
WARNING!
Take care to avoid contact between the hot rollers and
the face, neck, eyes or ears.
• Take a section of hair the width of a roller and wind the end of the
hair around the roller, holding the hair taut. For intense root lift wind
the hair to the root, for general movement or body, wind to the mid
lengths only.
• Secure the roller with one of the clips or metal pins provided.
• Once you have finished styling, turn off the unit by sliding the switch
back to the ‘0’ position.
• Leave the rollers in the hair for up to 10-15 minutes depending on the
style required.
• For long-lasting, defined curls, the rollers should be left in the hair for
a longer period of time or until the rollers have completely cooled. For
softer, glamorous waves or added volume the rollers should be left in
the hair for a shorter period of time before removing.
• To remove the rollers from the hair, gently hold the roller in one hand
and remove the clip or metal pin with the other. Slowly unroll the